 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2 GHz MEDIUM POWER BROADBAND SILICON MMIC AMPLIFIER UPC1678G UPC1678GV FEATURES * * * * * HIGH OUTPUT POWER: +18 dBm PSAT EXCELLENT FREQUENCY RESPONSE: 2.0 GHz TYP at 3 dB Down HIGH POWER GAIN: 23 dB TYP at 500 MHz SINGLE SUPPLY VOLTAGE: 5 V AVAILABLE IN TAPE AND REEL Gain GS (dB) 40 NOISE FIGURE AND GAIN vs. FREQUENCY AND VOLTAGE 30 GP 20 5.0 V 4.5 V 10 5.5 V 0 NF -10 10 30 100 300 1000 4.5 V 5.0 V VCC = 5.5 V 12 10 8 6 4 3000 DESCRIPTION The UPC1678 is a silicon monolithic integrated circuit designed as a wide-band amplifier covering the HF to UHF bands. The device features high output power, 18 dBm TYP, high gain, 23 dB TYP and operates from a single 5 volt supply. The UPC1678 is available in two package styles: 8 pin SOP and SSOP packages. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. Frequency, f (MHz) ELECTRICAL CHARACTERISTICS (TA = 25C, VCC = +5 V, f = 500 MHz) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS f3dB PSAT NF RLIN RLOUT ISOL PARAMETERS AND CONDITIONS Circuit Current at No Input Signal Small Signal Gain Upper Limit Operating Frequency at 3 dB down below the Gain at 100 MHz Saturated Output Power Noise Figure Input Return Loss Output Return Loss Isolation UNITS mA dB MHz dBm dB dB dB dB 11 1 30 UPC1678G, GV G08, S08 MIN 40 21 TYP MAX 49 23 60 25 1700 2000 15.5 17.5 6 14 4 35 California Eastern Laboratories Noise Figure, NF (dB) UPC1678G, UPC1678GV ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS VCC PIN PT TOP TSTG PARAMETERS Power Supply Voltage Input Power Total Power Dissipation2 UPC1678G, GV Operating Temperature UPC1678G, GV Storage Temperature UPC1678G, GV UNITS V dBm mW C C RATINGS -0.5 to 6.0 +10 OUT 330 -45 to +85 -55 to +150 IN VCC EQUIVALENT CIRCUIT Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on 5 cm x 5 cm x 1.6 mm glass epoxy PWB at TA = maximum operating temperature.. GND GND RECOMMENDED OPERATING CONDITIONS SYMBOLS VCC TOP CHARACTERISTICS Supply Voltage Operating Temperature UNITS V C MIN TYP MAX 4.5 -40 5.0 5.5 +25 +85 TYPICAL PERFORMANCE CURVES (TA = 25C) CIRCUIT CURRENT vs. SUPPLY VOLTAGE 70 VCC = 5.0 V 80 CIRCUIT CURRENT vs. OPERATING TEMPERATURE Circuit Current, ICC (mA) 0 1 2 3 4 5 6 Circuit Current, ICC (mA) 60 60 50 40 20 40 0 30 -40 0 40 80 Supply Voltage, VCC (V) Operating Temperature, TOP (C) UPC1678G, UPC1678GV TYPICAL PERFORMANCE CURVES (TA = 25C) UPC1678G, GV ISOLATION vs. FREQUENCY VCC = 5 V 40 UPC1678G, GV INPUT RETURN LOSS vs. FREQUENCY VCC = 5 V 40 Isolation, (dB) 20 10 0 -10 -20 -30 -40 Input Return Loss, (dB) 10 50 100 500 1000 3000 30 30 20 10 0 -10 -20 -30 -40 10 50 100 500 1000 3000 Frequency, f (MHz) Frequency, f (MHz) UPC1678G, GV OUTPUT RETURN LOSS vs. FREQUENCY + 30 UPC1678G, GV OUTPUT POWER vs. INPUT POWER f = 500 MHz VCC = 5.5 V VCC = 5.0 V VCC = 4.5 V + 20 VCC = 5 V 40 Output Return Loss, (dB) 30 20 10 0 -10 -20 -30 -40 Output Power, POUT (dBm) + 10 0 10 50 100 500 1000 3000 -20 -10 0 Frequency, f (MHz) Input Power, PIN (dBm) UPC1678G, UPC1678GV TYPICAL PERFORMANCE CURVES (TA = 25C) UPC1678G, GV OUTPUT POWER vs. FREQUENCY +30 30 UPC1678G, GV INSERTION POWER GAIN vs. FREQUENCY AND TEMPERATURE VCC = 5.0 V Insertion Power Gain, GP (dB) VCC = 5 V PIN = 0 dBm Output Power, POUT (dBm) 25 -45C +20 PSAT 20 TA = 25C 85C P1dB 15 +10 10 0 100 200 500 1000 2000 5 10 30 100 300 1000 3000 Frequency, f (MHz) Frequency, f (MHz) 3rd Order Intermodulation Distortion, IM3 (dBc) UPC1678G, GV THIRD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER PER CARRIER 0 f1 = 500 MHz, f2 = 502 MHz VCC = 5.5 V VCC = 5.0 V VCC = 4.5 V 25 UPC1678G, GV OUTPUT POWER vs. INPUT POWER AND TEMPERATURE VCC = 5.0 V f = 0.5 GHz -10 -20 Output Power (dBm) 20 15 -45C 25C -45C 25 25C -30 TA = 85C 10 85C 85 5 -40 -50 0 -20 -10 0 10 -60 -5 0 +5 +10 +15 SSB Output Power, POUT (dBm) Input Power (dBm) TEST CIRCUIT UPC1678G, GV 1800 pF VCC 300 nH 50 IN 1800 pF 1 8 5 2, 3, 4 6, 7 1800 pF 50 OUT Precautions: 1) These devices are ESD sensitive. Use proper precautionary measures when handling and installing these devices. UPC1678G, UPC1678GV TYPICAL SCATTERING PARAMETERS (TA = 25C) UPC1678G VCC = 5 V, ICC = 51 mA FREQUENCY (GHz) 0.05 0.10 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.50 MAG 0.193 0.126 0.138 0.208 0.248 0.256 0.239 0.190 0.152 0.093 0.042 0.167 0.214 0.256 0.292 S11 ANG 143 151 136 88 43 2 -35 -72 -115 -173 81 37 -7 -38 -53 MAG 9.9 12.6 13.6 14.4 14.0 13.1 12.5 11.9 11.9 11.4 10.0 9.1 7.4 6.1 5.5 S21 ANG 31 6 -23 -70 -111 -152 170 129 92 53 8 -30 -70 -107 -127 MAG 0.018 0.020 0.018 0.015 0.022 0.028 0.034 0.038 0.044 0.045 0.043 0.041 0.034 0.031 0.028 S12 ANG 26 10 -13 -7 -19 -38 -57 -87 -109 -136 -169 171 145 122 116 MAG 0.746 0.610 0.618 0.691 0.681 0.635 0.610 0.646 0.634 0.669 0.697 0.626 0.579 0.523 0.469 S22 ANG 91 44 6 -44 -85 -121 -155 167 136 98 53 9 -35 -77 -98 1.45 1.43 1.47 1.35 0.97 0.89 0.83 0.77 0.75 0.73 0.80 0.98 1.46 1.99 2.49 K S21 (dB) 23.5 24.1 24.8 26.4 28.1 26.7 25.6 24.9 24.4 24.0 23.6 23.4 19.4 17.2 16.1 UPC1678GV VCC = 5 V, ICC = 50 mA FREQUENCY (GHz) 0.05 0.10 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.50 MAG 0.136 0.106 0.126 0.174 0.184 0.150 0.102 0.112 0.169 0.180 0.146 0.072 0.045 0.137 0.180 S11 ANG 157 164 165 144 119 107 115 148 151 137 121 89 -37 -84 -95 MAG 10.2 12.1 13.2 14.4 15.0 14.6 15.1 14.0 12.4 11.3 7.6 6.2 4.6 3.9 3.9 S21 ANG 36 18 3 -17 -35 -52 -70 -88 -114 -131 -144 -159 -157 -164 -161 MAG 0.018 0.025 0.020 0.017 0.024 0.033 0.038 0.040 0.046 0.054 0.063 0.073 0.081 0.085 0.088 S12 ANG 3 26 15 50 71 75 77 83 92 99 101 102 100 97 95 MAG 0.683 0.609 0.621 0.673 0.657 0.619 0.599 0.585 0.542 0.449 0.335 0.224 0.192 0.206 0.219 S22 ANG 89 53 22 -10 -37 -64 -89 -116 -142 -163 -177 -177 -163 -157 -158 1.59 1.25 1.34 1.24 0.85 0.78 0.78 0.81 0.81 0.86 1.10 1.25 1.49 1.60 1.54 K S21 (dB) 23.0 23.8 24.6 26.4 27.9 26.5 26.0 25.4 24.4 23.2 18.8 16.2 13.4 12.1 12.2 UPC1678G, UPC1678GV OUTLINE DIMENSIONS (Units in mm) UPC1678G PACKAGE OUTLINE G08 8 7 6 5 8 7 6 UPC1678GV PACKAGE OUTLINE S08 5 1678 N XXX Denotes Date/Lot Code 1678 Detail of Lead End N XXX 2 3 5.70 MAX 4 6.5 0.3 0.15 +0.10 -0.05 4.4 1.1 1 1 2 3 3.0 MAX 4 +0.10 0.15 -0.05 3 -3 +7 4.94 0.2 3.20.1 0.870.2 1.49 1.8 MAX 1.50.1 1.8 MAX 0.1 0.1 1.27 +0.10 0.40 -0.05 0.6 0.2 0.94 MAX 0.1 0.1 0.65 +0.10 0.3 -0.05 0.5 0.2 0.575 MAX LEAD CONNECTIONS 1. Input 5. Output 2. GND 6. GND 3. GND 7. GND 4. GND 8. Vcc LEAD CONNECTIONS 1. Input 5. Output 2. GND 6. GND 3. GND 7. GND 4. GND 8. Vcc ORDERING INFORMATION PART NUMBER UPC1678G-E1 UPC1678GV-E1 QTY 2500/REEL 1000/REEL EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM PRINTED IN USA ON RECYCLED PAPER -9/96 DATA SUBJECT TO CHANGE WITHOUT NOTICE |
Price & Availability of UPC1678G-E1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |